Item #952OP3 - 8” x 10” Full Color Sublimation Grocery Shopping Tote Bags

Product Specifications

Product Size: 8” W x 10” H x 4” Gusset
Handles: 20”

Imprint Area: 8” x 10”
Imprint Front & Back Only: 12” W x 13” H

Packaging: Bulk

Shipping Information:
Master Carton Weight
10 Lbs / 150 Pcs
Master Carton Dimensions
12" L x 10" W x 12" H

Material: 100 GSM Non-woven Polypropylene

Overseas Production: 12 Days

Item 250 500 1,000 2,500+  
952OP3 $3.49 $2.55 $2.45 $2.35 (C)

Description/Features

Short run full color sublimation tote bags have arrived! These Totes feature a full color, full bleed, edge to edge imprint on the front and back panels (same imprint on front and back; for different imprint on one side, add another setup charge). The side gussets, straps, bottoms and piping are black color only.  The straps are cross stitched into the bag for greater strength.  They’re made of a strong 100 GSM Non-woven polypropylene material. The imprint areas are unobstructed by the straps. Add a PE bottom insert (Item #PE Insert) for an additional cost of   $0.30 (G) which must be noted on your purchase order (and add 10 pounds per 100 bags to the case weight).

 

Setup Charge

Setup Charge: $55.00 (G).



General Information

  • Price Includes: Full Color Imprint on front and back of bags; gussets, bottoms and straps are black only.
  • Production Time: 12 Days after proof approval.
  • Repeat Setup Charge: $25.00 (G) if reordered within 12 months. After 12 months all setup charges apply.
  • Pre-Production Proof: 250.00 (G) to 600.00 (G) (depending on artwork), plus set up charges, cost of item and overseas freight charges. If any changes are made to the original artwork after receipt of the pre-production sample, additional set-up charges will be incurred.
  • Spec Samples: Are Not Available.
  • Please Note:  Regarding color matching, dye-sublimation printing process uses CMYO (Cyan Magenta Yellow Overcoating) colors, which differs from the more recognized CMYK colors in that the black is eliminated in favor of a clear overcoating. As a result, PMS inks cannot be matched exactly. They are only a reference point and an approximation. Factory will do it’s best to match but cannot guarantee an exact color match.


Important Information: Proofs provided are for logo placement and size approval only. The colors shown on e-proofs may not be accurately represented on your computer monitor (All metallic inks will NOT show up as metallic on screen) and PMS colors as printed in the Pantone Color Book are only a reference point. Therefore, e-proofs are not an exact color representation. Variations in print substrates/materials make it impossible to exactly duplicate PMS colors on Innovation Line products. Color variation cannot be considered a defect due to ink, lighting, and material variations. Innovation Line is not responsible for any color variation. In screen printing pad printing, Sublimation or transfer process exact color matches cannot be achieved. Regarding color matching, dye-sublimation printing uses a computer printer to generate a heat transfer to transfer the image onto fabric. Dye-sublimation printers use CMYO (Cyan Magenta Yellow Overcoating) colors, which differs from the more recognized CMYK colors in that the black is eliminated in favor of a clear overcoating. As a result, PMS inks cannot be matched exactly. They are only a reference point and an approximation. Laser engraving appears on actual item as tone on tone (as the laser engraving uses the laser to burn through the surface), on clear acrylic it appears white frost, on a proof laser engraving is most often shown in gray color. Imprint will shift slightly when printed or lasered. Each product is manufactured and printed individually, so 3/16” movement in logo alignment may result and cannot be considered a defect in printing.